Project · Residential · Samsung Frame

Samsung Frame TV With No-Gap Wall Mount Installation

A residential Frame install on the slim-fit no-gap bracket, so the panel sits flat against the wall like a framed picture instead of standing off it like a television. The customer found us on HomeStars.

  • 10,000+ installations completed
  • $2,000,000 liability insurance
  • One-year material & workmanship warranty

Frame installs start at $259.99 up to 65 inches and $299.99 for 77 inches and up. Send a photo of the wall and we’ll confirm.

Recognised by

HomeStars Best of Award winner 2018–2023 · Best of Houzz Service 2018–2021

The brief

Why a No-Gap Frame Install Is Fussier Than It Looks

The entire point of a Samsung Frame is that it does not look like a TV. It sits flush to the wall with no shadow line behind it, and in art mode it reads as a picture. That effect depends completely on the panel sitting genuinely flat — and because nothing stands off the wall, there is nowhere to hide a bracket that is a couple of millimetres out. On an ordinary TV that error disappears into the gap. On a Frame it is the first thing you see.

So the wall gets more attention than the television does. We check how flat the surface actually is, shim the slim-fit bracket true, and plan where the One Connect box is going to live before anything is drilled — because the whole look falls apart if a cable comes out of the bottom of a picture frame.

What the install needed

  • Slim-fit no-gap bracket, flush to the wall
  • A genuinely flat mounting plane, checked not assumed
  • One Connect box position planned before drilling
  • The single thin One Connect cable concealed
  • Height set off the seating, like hanging a picture

What we did

  • Wall surface checked for flatness across the full panel width
  • Bracket shimmed true so the panel sits with no shadow line
  • Cable route planned first, then cut once
  • One Connect cable concealed so only art is visible
  • Panel levelled, art mode confirmed, packaging taken away

On site

Photos From the Frame TV Install

The finished Frame sitting flush in the room. Click any photo to open it full size.

How it goes

How a Frame Install Runs

Five steps — and the first three all happen before the TV is unboxed.

  1. Send photos

    The wall, the room and the model. Frame, LG Gallery and Hisense Canvas all mount this way.

  2. Firm price

    From $259.99 up to 65 inches, from $299.99 for 77 inches and up. Recessing the One Connect box is quoted on top.

  3. Plan the cable

    Where the box lives and where the cable runs, decided before a single hole exists.

  4. True the plane

    The bracket is shimmed until the panel will sit genuinely flat against the wall.

  5. Hang and check

    Levelled, art mode on, cable invisible, everything cleared away. One-year warranty.

Related work

More Frame, Gallery and Flush-Mount Work

Art-mode sets are a speciality. Samsung Frame, LG Gallery Series and Hisense Canvas all mount flush.

More of our work

Recent Installations Across Toronto and the GTA

Standard TV installs, Samsung Frame sets, fireplace mounts, soundbars and concealed-wire jobs. There’s more in the full installation gallery and in our other project write-ups.

Free Quote

Get a price for your Samsung Frame installation

Send the screen size, a photo of the wall and your postal code, and tell us whether you want the One Connect box recessed. We’ll come back with a firm price.

Takes about a minute · One-year workmanship warranty · $2,000,000 liability insurance