Project · Industrial · Multi-screen

Industrial Four-Into-One Screen Installation in Toronto

Four panels set out as a single display in an industrial space — a job where the tolerance is measured in millimetres, because every alignment error lands on the seam between two screens where you cannot miss it.

  • 10,000+ installations completed
  • $2,000,000 liability insurance
  • One-year material & workmanship warranty

Planning a video wall or a multi-screen display? Tell us the panel count and the wall and we’ll price it.

Recognised by

HomeStars Best of Award winner 2018–2023 · Best of Houzz Service 2018–2021

The brief

Four Screens That Have to Read as One

A four-into-one setup is not four TV installs. It is one install with four times the opportunity to be wrong. Each panel has to sit at exactly the same depth off the wall, exactly the same height, and exactly the same distance from its neighbours — and unlike a single screen, there is a hard reference right next to it showing anyone who looks whether you got it right.

The industrial setting added the usual complications. Industrial walls are rarely flat and rarely built for hanging things off, so the substrate had to be established first and the mounting plane shimmed true before any panel went up. Get the plane wrong at the bracket stage and no amount of adjustment at the panel stage will save it.

What made it hard

  • Four panels sharing three visible seams
  • Industrial wall — not flat, not built for mounting loads
  • Mounting plane had to be trued before any screen went up
  • Combined weight needing real structural fixing
  • Cable for four screens routed to one source position

What we did

  • Substrate established and load path confirmed first
  • Mounting plane set out and shimmed true across all four positions
  • Anchors sized to the total load, into solid material
  • Panels hung and adjusted against each other, not individually
  • Signal and power for all four run back to one tidy position

On site

Photos From the Four-Into-One Install

Set-out, mounting and the finished four-panel display. Click any photo to open it full size.

How it goes

How We Build a Multi-Screen Display

The panels go up last. Almost all of the work happens before that.

  1. Establish the wall

    What it is made of, what it will carry, and how flat it actually is.

  2. Firm price

    Panel count, wall type and cable routing, priced up front.

  3. Set out the plane

    All positions marked together and shimmed true before anything is hung.

  4. Anchor for the total load

    Fixings sized to all four panels combined, into solid structure.

  5. Hang and align

    Panels adjusted against each other until the seams read as one display, then tested.

Related work

More Multi-Screen and Commercial Work

Video walls, boardroom displays and multi-screen setups across the GTA.

More of our work

Recent Installations Across Toronto and the GTA

Standard TV installs, Samsung Frame sets, fireplace mounts, soundbars and concealed-wire jobs. There’s more in the full installation gallery and in our other project write-ups.

Free Quote

Get a price for a video wall or multi-screen display

Tell us the panel count and size, and what the wall is built from. Send a photo and we’ll come back with a firm price and the mounting method.

Takes about a minute · One-year workmanship warranty · $2,000,000 liability insurance